Water Based Acrylic Sealer ClearSureCrete’s Super WB is a 30% solids, water based, low VOC (less than 100 g/L), strong binding, clear, gloss acrylic sealer for SureCrete overlays or any cement based product. This product contains a hybrid, self-cross-linking, acrylic resin with built-in water repellency and tenacious penetration and adhesion. It contains no wax or silicone additives. The coating is chemical resistant, durable, does not blush, has long solids retention, and is easy to clean. Super WB is non-fl ammable and environmentally safe perfect for other sealers stone products .

Water-based acrylic sealers are often the product of choice for homeowners looking to seal exterior overlays or freshly poured concrete applications because of its ecologically friendly properties of being lower in VOCs, having less of an odor during application and curing, and being less hazardous a material to deal with. For contractors this is often the case as well since its eco-friendly green properties allow SureSeal Super WB to accredit a job site with more LEED points on projects requiring these specifications like concrete and pavers protection. Super WB is also available in a low-luster variety for those looking for a water-based acrylic sealing product without the shine provided by Super WB product paver sealer.

Here are some areas/applications where Super WB will be applied:
  • Broom Finish Overlays
  • Sprayed Texture Coatings
  • Stamped Overlay Floors
  • Slop-Trowel Exterior Textures
  • Non Solvent Based Sanded Sealer Pavers
  • pavers product
  • Sealing Paver Stones
  • Pool Decks and Patios
  • Vertical Concrete Overlays
  • Block Walls and Retention Walls
  • Driveways and Sidewalks
  • Concrete Pavers
  • Pavers product Sealer
  • Clear Seals Concrete Surfaces
  • Stone Applied Sealers

How Do You Apply SureCrete Super WB water-based acrylic eco-friendly concrete and paver sealing?

Our Acrylic Sealer products are some of the easiest to apply and use:

  1. Any surface that is about to be sealed needs to be completely cured, clean and free of all contaminants, and fully profiled and etched.
  2. Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 24 hour period following application.
  3. Super WB Acrylic Sealer can be applied by roller, airless sprayer or pump-up sprayer. Whatever your application technique, make sure to apply in thin, even coats over your surface.
  4. Two coats are typically suggested with any exterior project receiving an acrylic sealer, with the second coat being applied as soon as first coat is able to be walked on, and is applied in the same manner as the first coat.

Surecrete Super WB Water Based Acrylic Sealer

Surecrete Super WB Acrylic Sealer

Product #:  21GHIGWB 2HIGWB 2LLWB
Packaging:  1 gal pails  5 gal pails

Get Super WB Price

Your Role:*

Frequently Asked Questions About Super WB:

Question: Can I use just one coat of Super WB?

Answer: Technically yes, however it is not suggested. For the best results we highly recommend using two thinly applied coats of Super WB water-based Acrylic Paver Sealer and Concrete Sealer.

Question: Will Super WB survive the freeze/thaw cycles in my area?

Answer: While it is slightly less durable in this regard than our HS Series premium acrylic sealer products, it does still have some moisture-migration-reducing properties.

Question: Can I use another, lower solids content sealer over top of Super WB?

Answer: Yes, in fact, this sealer is able to be diluted with water and therefor can be applied at a variety of dilution rates once any given coating has finished curing.

Specs and Properties of Super WB:

Coverage  Approx 180-200 square foot per gallon, per coat (undiluted)
VOC Rating  less than 100 g/L
Solids Content  30%
Shelf Life  1 year in original unopened container
Ready for recoat  24 hours
Light Duty Use  24 hours
Heavy Traffic Ready  72 hours
Appearance (cured)  Clear Gloss
Appearance (wet)  Clear
Water Resistance  Excellent, beads water
Mechanical Stability  Excellent
Light Stability  Excellent
Diluent  Water
Odor  Solvent
Application Temperature  50 – 90 degrees Fahrenheit


Test Data for Super WB

Blush  4 hr dry / 18 hr Immersion: No Blush
Adhesion  Dry Concrete: Excellent, Wet Concrete: Excellent
QUV Accelerated Weather Testing  -53: No blistering, No yellowing @ 250 hours
Abrasion Resistance  12.5 grams loss
Block Resistance  D-4969: Excellent
Heat Stability @ 120 degrees Fahrenheit  D-1849: Excellent
Film Formation @ 40 degrees Fahrenheit  Passed
Water Absorption  2.4 grams per cubic meter
Pencil Hardness  D-3363: HB-H
Hot Tire Pick-Up  Passed (Under extreme circumstances delaminating could occur. All tire manufacturers were not tested. Chemicals used in tire manufacturing may be detrimental to all sealers from vehicular parking.)


Chemical Resistance for Super WB (Testing ASTM D-1308)

Transmission Fluid  Resistant
Gasoline  Remove Immediately
Formula 409  Resistant
Motor Oil  Resistant
Brake Fluid  Remove Immediately
Aggregate Rating
3.5 based on 25 votes
Brand Name
Surecrete Design Products
Product Name
Super WB Water Based Clear Concrete Sealer